诗词屋>英语词典>shafts翻译和用法

shafts

英 [ʃɑːfts]

美 [ʃæfts]

n.  (电梯的)升降机井; 通风井; 竖井; 井筒; (箭、高尔夫球杆等的)杆; (锤等的)柄; (机器的)轴
v.  亏待; 苛待; 欺骗
shaft的第三人称单数和复数

柯林斯词典

  • N-COUNT (电梯等的)升降机井,竖井,井筒,通风井
    Ashaftis a long vertical passage, for example for a lift.
    1. He was found dead at the bottom of a lift shaft.
      他被发现死在了电梯井的底部。
    2. ...old mine shafts.
      老式矿井
  • N-COUNT (机械的)轴,传动轴
    In a machine, ashaftis a rod that turns round continually in order to transfer movement in the machine.
    1. ...a drive shaft.
      驱动轴
    2. ...the propeller shaft.
      螺旋桨的传动轴
  • N-COUNT (矛、高尔夫球棒等的)杆;(斧头等的)柄
    Ashaftis a long thin piece of wood or metal that forms part of a spear, axe, golf club, or other object.
    1. ...golf clubs with steel shafts.
      带钢杆的高尔夫球棒
  • N-COUNT (光线、阳光等的)一束,一道
    Ashaft oflight is a beam of light, for example sunlight shining through an opening.
    1. A brilliant shaft of sunlight burst through the doorway.
      一束耀眼的阳光从门口照射进来。

双语例句

  • Bearings keep the shafts steady.
    轴承可以使轴的旋转保持平稳。
  • A method for aligning the shafts of a turbo-generator set is introduced.
    本文对汽轮发电机组安装、检修过程中的轴系对中及调整方法进行了研究。
  • The carriage is supported on guide shafts. Remove thrust bearings from rear main bearing carrier.
    托架支承在导轴上。从后主轴承托架上拆下止推轴承。
  • The small metal shaft will be removed, and I ll drill a hole to accept the radar shafts.
    小金属轴将被删除,我会钻一个孔,接受雷达轴。
  • Either a faulty gas valve or broken wire caused hydrogen to leak into the ventilation shafts.
    气体阀泄漏或者线路损坏,导致了氢气进入到通风装置中。
  • Endless loop of flexible material between two rotating shafts or pulleys.
    在两个旋转的轴或滑轮中间的由柔韧性材料制作的连续的线圈。
  • Coupling that connects two rotating shafts allowing freedom of movement in all directions.
    连接两个转轴可以在任何方向自由移动的耦合。
  • Purpose: Widely used for the carburizing and quenching of gears, bearings, shafts and other mechanical parts.
    用途:广泛适用于齿轮、轴承、轴类零件及其它机械零件的渗碳、淬火热处理工艺。
  • A new kind of NC system for machining shafts with non-circular cross-section is proposed in this paper.
    提出了一种新型的非圆轴数控加工系统,用于横截面为非圆形状的轴类零件加工。
  • Remove both drive shafts on transmission side and tie them up.
    拆下变速器侧的两个驱动轴并将它们绑紧。